Mastergrip 3800 is a two-component, room temperature curing, zero V.O.C, 100% solids epoxy Polyvinylchloride adhesive. Mastergrip 3800 has an extended working life and develops excellent adhesion and resistance to water and chemicals after curing.

Mastergrip 3810 is a two component, room temperature curing, zero V.O.C, 100% solids epoxy adhesive used for bonding Polyvinylchloride. Mastergrip 3810 is an accelerated version of Mastergrip 3800, bonded components can be handled in as little as 6 hours. Excellent adhesion and resistance to water and chemicals is developed after curing.

IRIS 7025 is an ultraviolet curable 100% solids zero V.O.C. anti-skid coating, which forms a strong, slightly tacky film after curing. It is formulated to replace environmentally unfriendly vinyl films currently in use for this type of application.

IRIS 3045 is a low viscosity 100% solids zero V.O.C one-part UV curable laminating adhesive specifically designed for treated polypropylene. Bonded films show high initial adhesion, which continues to increase over a 24-hour period generating a permanent tack free bond. In many cases a destructive bond is generating making IRIS 3045 ideal for tamper free packaging.

IRIS 3035 is a low viscosity 100% solids zero V.O.C one-part UV curable laminating adhesive specifically designed for opaque plastic, metalized films, foils, and paper. The adhesive is print, cured and then nipped. The film exits the UV curing station as a tacky PSA, which is immediately nipped to the second film. The bonded films show high initial adhesion. As IRIS 3035 continues curing post U.V. light exposure, adhesion continues to increase over a 24-hour period generating a permanent bond.

IRIS 5090 is a 100% solids zero V.O.C. one-part UV curable, temporary, peelable protective coating for applications requiring high chemical resistance, high impact resistance, as well as abrasion resistance. Upon exposure to UV light, IRIS 5090 cures to a semi-flexible coating which allows for protection of components during processing and easy removal from substrates upon completion. Iris 5090 has the ability to be cured in excess of 90 mils when necessary.

Masterweld 6400  is a 100% solids zero V.O.C one-part toughened epoxy adhesive that cures at temperatures as low as 80 degrees Celsius. This product is supplied as a viscous thixotropic paste at room temperature, which exhibits high levels of green strength. MW 6400 produces excellent bonds to various thermoplastics materials. Low softening point plastics such as ABS can now be bonded using MW 6400.

MW 6355 is a heat curing, one component epoxy adhesive developed to replace environmentally unfriendly phenolic adhesives. This product is supplied as a thixotropic liquid at room temperature and produces excellent bonds to steel, aluminum, and various plastics.

Kleen Brite  This waster based non-flammable cleaner exhibits high dissolving power for uncured two-part epoxy systems, one-part epoxy systems, urethanes and water based adhesives.

Cleaner 334 LV is a high boiling, non-VOC, non-halogenated based, water rinsable cleaning and stripping solution. This cleaning system has been specifically formulated to replace high VOC paint strippers and methylene chloride cleaners. Cleaner 334 LV exhibits very high solvent activity over a broad range of resins commonly used in paint and coating formulations.  It solvates lacquer type systems, two component epoxy systems, and is highly effective in solvating both acrylic and polyurethane formulations. When desired, the rate of solvent activity can be increased by raising the temperature of Cleaner 334 LV.